Відео

Is amsoil signature series 5w30 good for extreme cold weather?? Like -40m

Just completed this conversion, including filter housing gaskets (of course). Suggestion - plan to insert PTFE/CPE flex hose for at least lower housing inlet line. If you cut original lines at the extreme end of line (right before flare) you might be able to work it. Otherwise, you'll have issues with the short straights/bends. 1st cut didn't provide enough straight line section for fitting. Then cut line back to 2nd flat section (~1" further) and was able to get flare fitting on. But the line angle is not great and close to frame/transaxle. I consider this a workaround until I get a flex hose in there (which I had it to begin with).

You forgot a piece in your steering wheel. It's a big piece towards the end that needs to go back on there

Thank you! This went from me thinking i would be out there for hours, to being able to do it on my lunchbreak 😊

I have a missing rod on one side.

My rod pulled all the way out. Can't get tailgate open

Update???????

Our

Is

Where

I have a 4.3 and i was wondering if all the Blocks have the 2 tapped holes for the adapter to bolt to cause my remote system has to be bolted to block and im not sure if my block has the 2 holes i have seen some that doesent have them.

Thanks for posting this very helpful

To me Expensive Oil like Amsoil , Red Line are all over Priced I have had many Service Trucks and used Walmart Super Tech 10w30 and all trucks lasted over 450,000 miles changed the oil every 4000 miles !!

Did you ever do the follow up video with the oil analysis results for Pennzoil?

Such bs mine stuck on the inner lip on the flat plate part wont budge nothing

Last resort take long flathead screw drive look down edge of tailgate and see latch ,stick screwdriver down into latch and twist ,do this on each side of tai Lgate. And it will open

Yes, brother, I pray and ask God for help! No matter how hard the problem is, He never fails! Thank you for your video!

any oil analysis on pennzoil platinum and the quaker oil??

I saw the max line on that reservoir but I don't see the min line. Where is it?

What connector is that? Part number please

at what point do you reconnect the airflow sensor.

Thank you! I changed in myself in 58 seconds! It's crazy how much they charge a person!! 🤩

What meter are you using for your tachometer and everything's going from 1.9 to 606 is that the meter that's RPM gauge what what are you doing there

Why do the intake bolts need to be new clean ? Enlighten me ? If I can install them why do I have to make them hospitable clean ?

Do you have part numbers to the fittings and from where did you get them

I have owned my car for almost 10 years . I didn't know there was a capped end and open one. I didn't know there was an arrow for the direction. I didn't know about the notches, and when I opened mine ,I found the notches upside down, because the open end has flat side and a notch that is far from the end. THANK YOU VERY MUCH SIR.

pls what can make my Honda accord burns my engine oil so fast like weekly

You're changing the transmission fluid very early. It might say that in the scheduled maintenance. When I suggested changing my transmission fluid in my six speed manual to my mechanic. They suggested doing it at 100000 miles.

I also read Rat 540's stuff. I just bought a new Westinghouse 14,500 peak watt generator and just got finished breaking it in with Valvoline conventional 10w-30. I have the same jug (or two) purchased at a local WalMart and I'm gonna pick it up in a few hours. As far as my vehicles, I've been a Mobil 1 guy for that past 20 years but based on Rat's blog, I'm gonna give the QS oil a try as well.

I enjoy the GMT 400 content! Thanks for the videos!

NEVER use an engine flush

More foam doesn't mean better as a wash/ MORE prewash/water YES then go to town and nice rain/water run off on the 15 miles on the hiway 🙂

Your fathers car wash. My dad got this stuff when i was a kid. I also would use it to wash the neighbors cars for a few bucks. I got this in a clearance bucket with other TW products. Yea at best its barely mediocre. It has very little lubricity, doesnt sud up all that great. It didnt do a good job on the glass either. I probably use the rest to clean the rims with it...C- would be my gade...

Hi mate. Do you have a quick connect for the gun end of a gerni , so I can connect a bowdans snow cannon on the short gun

3:52 demonstrates use of clamp

Where is our update?!?!?!?

My tailgate has a rod on driver side and dosent have a rod on the passenger side how do I open it if I don’t have a lever pulling it ?

Keep making these please. I watched Maguires and chemical guys combination and has used it ever since! on my lexus, and BMWs Now, chemical guys citrus has become a bit hard to get lately, so I’m in the hunt for new combination. I grabbed Chemical Guys Extreme Body wash to replace it. I would like to know your opinion on it and how would you rate it. Hopefully you see this and see a video on it.

very poor video , you never showed when to hook the iac back up or when you disconnected the battery ,furthermore you assume everyone knows where to hook up the multimeter ,not gonna subscribe to this one!

thanks for this now I know

I have a 1988 k1500 with a 305 in it. I did this and my truck is still surging. I rebuilt the throttle body and changed the injectors. All new gaskets in the throttle body. It idles where it should just surges like it’s trying to die then jumps back up to 730-750 then back down to 400-450 in park. After it warms up a bit idles is about 900 then when I go into gear it surges again.

any update on this?

So, you add the engine flush fluid into an old oil, run it for 15min and then drain when do an oil change, correct?

so much talking

Where did you connect the meter to show the rpm’s?

I have a 1995 GMC Sierra 1500, 350, 5.7. I was loosing coolant with no external leaks. I found I have coolant in one spark plug hole. That's a head gasket correct? I have not run it hot.

5..that's cold.!just the thought of cold weather gives me chills and it right at 90 at the moment

Excellent video. Thanks for posting 🙌

Is there a parts list for this repair? I think this is the best one i have seen. How much of the lines is cut?

What camera did you use to capture the suspension?